French Fry Cutter, 3/8'' Cut Review

Average Reviews:

(More customer reviews)This is a serious piece of kitchen equipment.
We make lots of "french fries" by baking them in the oven to keep them more healthful than the greasy ones you can buy in the store. Cutting them up by hand was time consuming and inconsistent, so we bought one of these to see what it could do.
This thing cuts serious french fries with no problems. We can cut enough fries in 30 seconds to feed four people (about 8 or 9 potatoes). It takes longer to peel the potatoes than it does to cut them LOL. It also takes longer to clean out the cutter than it does to cut the potatoes. But anyway, the cutter does a great job.
Be advised that I had to screw this thing down to an oak board to keep it stabilized for cutting. You don't want to try working this just sitting on the counter top because it takes quite a pull to push the potatoes through. I clamp the board to the kitchen counter with a C clamp and it works great. This is not a flimsy toy but a serious machine. It weighs 15 pounds, probably 20 including the oak plank.
It takes a hefty pull to push the potatoes through the cutters, but it isn't difficult once you get the knack of it. If you make lots of fries, this machine will get the job done.
I bought this cutter from KegWorks via Amazon. They also have additional cutters available in case you need sizes other than 3/8 inch. You can get additional cutters for 1/2 inch and 1/4 inch fries as well. The cutters are easily interchangeable using a standard phillps screwdriver.
This is a somewhat expensive kitched appliance, but you get what you pay for. I read too many reviews telling how the cheaper cutters simply break right away. That won't happen with this one because it is made of metal not cheap plastic.

Click Here to see more reviews about: French Fry Cutter, 3/8'' Cut

French Fry Cutter, 3/8'' Cut.

Get 36% OFF

Click here for more information about French Fry Cutter, 3/8'' Cut

Zyliss Apple and Potato Cutter with 2 Stainless Steel Cutting Inserts Review

Average Reviews:

(More customer reviews)I thought Zyliss was a great company 10 years ago but now it seems they are cost cutting. I own several new Zyliss products and they are all breaking. I won't buy another. This apple slicer didn't even make it past the first apple without bending a centering tang, and does NOT stack together for storage as advertised since the pieces are not round (but should be). The reason I bought it was to have a complete cut down into a soft bed ... this so called soft bed was very hard and didn't cut through. I sent it back. Amazon made it painless to return this ... but ... I don't recommend going through the drill to buy it and return it. And you WILL return it !

Click Here to see more reviews about: Zyliss Apple and Potato Cutter with 2 Stainless Steel Cutting Inserts

Zyliss' Apple and Potato Cutter is perfect for cutting, dicing and coring a variety of fruits and vegetables. It features two stainless steel cutting inserts. The soft-touch base ensures blades will cut through tough skins. By Zyliss. Zyliss is a Swiss company that's been around for over 50 years. They're internationally known for their finely crafted hand-held kitchen tools. Legendary durability quality and engineering, Zyliss tools have been a favorite in the united states for over four decades. All of the Zyliss products are made of only the finest materials using the most modern production methods. Each Zyliss tool is precision made and undergoes stringent inspection before being introduced to the market.

Click here for more information about Zyliss Apple and Potato Cutter with 2 Stainless Steel Cutting Inserts

Weston Restaurant Quality French Fry Cutter Review

Average Reviews:

(More customer reviews)Having tried any number of wimpy french fry cutters, I finally bit the bullet (premium pricing) and ordered this one.
It is the bomb.
When I opened the box, I was stunned at the durability promised by the quality of the components. The cast iron parts (lever arm, feet and frame) are covered with a nice soft green finish so thick that I can't tell whether it's a really good powder coating or baked enamel. Most important, the cutter heads and their heavy metal frames are strong enough to cut yams with no sign of flexing that might otherwise threaten a broken frame. However, yams may mush up before they will pass through the cutter. I wound up with one yam that yielded only two-inch-long shoestrings, even when I used a series of full-body presses on the armature in trying to force the yam through. Better to use a mandoline and/or a chef's knife for yam fries, I've concluded.
But never fear: potatoes work fine in the Weston, particularly if you've left Russet spuds in a cool dark place for a month or two before cutting. That way, some of their starch will convert into sugars that will make your fries tastier and crisper.
Cutter heads are a snap to change, using three hand turned wing-nuts. The pusher head can be replaced by undoing two large and relatively accessible Phillips-head screws. Another great feature is the availability of important optional accessories, like different size cutter heads and huge suction cups that attach to all four feet for a great grip on granite counter tops. These suckers are even made of a green rubber that matches the color of the frame.
Nobody's perfect, nor is this product. The suction cup feet are attached by poking protruding bolts through the feet of the cutter and screwing on their locknuts. Trouble is, the bolts I got were too short to rise above the holes in the feet. I solved that one by shaving an eighth of an inch disk off of the top of each suction cup using a paring knife, to make the bolt protrude far enough for the nut to "grab."
Other problems were a bit more vexing. The two screws that held the pusher plate to my machine were tightened to the point where the thick lockwashers behind them had totally flattened out. These folks must have gorillas working on their assembly line. It took a brace and bit to loosen the screws to the point where I could remove them and replace the pusher head. Also, proper assembly of the unit called for the use of a couple of wrenches to properly tighten the bolts holding the armature in place.
Big deal. This product is a joy to use, really does work splendidly with spuds up to six inches long, is easy to operate and clean up when done. If you can afford it, accept no substitutes.

Click Here to see more reviews about: Weston Restaurant Quality French Fry Cutter

Cuts up to 50 lbs. of potatoes into restaurant style french fries in an hour!

Get 30% OFF

Click here for more information about Weston Restaurant Quality French Fry Cutter

Progressive International Jumbo Potato Cutter Review

Average Reviews:

(More customer reviews)Years ago I bought a potato cutter at a garage sale. It was all steel and a good size (accepting virtually any potato without cutting it down to size). I've been very happy with it.
Recently we bought a cabin so needed to add a second set of kitchen tools. One of the items we decided we wanted was a second potato cutter. I ordered this one because of the "jumbo" in the name hoping that it would work as well as our previous garage sale cutter.
Thankfully, this product lives up to the jumbo name. It's larger than our garage sale cutter by 20% or so. It is easy to use and clean up. Not to mention it has a suction cup to attach it to the counter which works surprisingly well.
Pros: Large with two sizes of cutting blades; a larger mesh for traditional fries and smaller mesh for McDonald-like fries.
Cons: It's plastic and steel which makes me wonder about longevity.
All-in-all, I think this was a good purchase.
Update
My wife loves this vegetable cutter and has asked me to order another! She has used ours at least twice a week since we recieved it in Aug 2005 and has had no difficulties with it at all. I'm surprised to see that another purchaser has had problems with this product. Perhaps they received a defective one? At any rate, I would still recommend the product.


Click Here to see more reviews about: Progressive International Jumbo Potato Cutter

Easily make delicious French fries in your own kitchen with this jumbo-sized potato cutter from Progressive International, which is also ideal for carrots, zucchini and yams. It features two separate blades for thin or thick slicing (1/4- and 3/8-inch), and it cuts large whole potatoes in one motion. It also offers an extra-strong suction cup base to minimize slipping. The strong plastic and stainless steel frame will withstand years of slicing. The unit measures 4-1/4 by 12-1/4 by 5-1/4 inches. Blades and pusher plates are dishwasher safe; hand wash base frame.

Click here for more information about Progressive International Jumbo Potato Cutter

Progressive International Vegetable/French Fry Cutter Review

Average Reviews:

(More customer reviews)The product itself get 5 stars for ease and functionality and 4 stars for a cleaning problem and lack of accessories.
In the package are 2 different sized blade grates and push blocks that are easily assembled and removed from the main body by depressing a small lever and turning a latch, respectively. Cutting capacity is less than 4 inches in length. You'll have to "cut" large Russets before "cutting!"
Clean-up is mostly easy, if you have a baby bottle nipple brush to poke through the grate holes and cross brush the push blocks (a toothbrush for the latter works also). However, the main body has slots where the push block slides. This area collects and traps small potato fragments and is difficult to clean.
I would like to see different shaped blade grates, just for the heck of it. You never know what strange moods you will be in!? I would enjoy a larger capacity in the main body, but this would cause more strength to cut the potatoes. Right now, there's a good compromise between capacity and cutting effort.
Don't forget to double fry your potatoes: about 2-3 minutes at 325F, pat dry, then about 5 minutes or golden brown at 375F.
You can check the cooking sites for variations.

Click Here to see more reviews about: Progressive International Vegetable/French Fry Cutter

Progressive International is your source for the widest range of functional, inventive, and fun kitchen tools and great ideas put into practice. Our in-house designers spend hours in the kitchen coming up with ways to improve on a variety of traditional tasks and tools. Established in 1973, our commitment to quality and service allows us to offer a broad selection of quality kitchenware and other household products.Use this Progressive vegetable/french fry cutter for french fries and vegetable sticks.Simply place the vegetables and small or half potatoes into the chute and press through for thick and thin pieces.The stainless steel blades are interchangeable: 25 holds for large and 49 holes for small.It features an easy to operate lever action for all your cutting needs.

Get 16% OFF

Click here for more information about Progressive International Vegetable/French Fry Cutter